[ Pobierz całość w formacie PDF ]
.c.Click Launch.3.Click the DHCP Service tab.4.Create a DHCP server object.a.Click the Create button.b.Click DHCP Server.c.Click OK.d.Browse to your container.e.Click your server object.f.Click OK.g.Click Create.7-31IG 7-62 This document should only be used by a Novell-certified instructor.Revision 1.0If you think this document was pirated, call 1-800-PIRATES or 1-801-861-7101. Using DNS/DHCP ServicesPresentation NotesHands-On Exercise 7-2:Configuring and StartingDHCP ServicesIntroduce the exercise.:20 Assist the students as necessary.a Conduct the exercise.Revision 1.0 This document should only be used by a Novell-certified instructor.IG 7-63If you think this document was pirated, call 1-800-PIRATES or 1-801-861-7101.Using DNS/DHCPServices NetWare 5 Advanced Administration Instructor Guide5.Create a subnet object.a.Click the Create button.b.Click Subnet.c.Click OK.d.In the Subnet Name field, type yourservernameSUBNET.For example, if your server is FS1, you would type FS1SUBNET.e.In the Select NDS Context field, type in or browse to and selectyour context.f.In the Subnet Address field, type the subnet address thatcorresponds to your server.(Refer to Table 7-1 below.)Server Subnet Address Subnet MaskFS2 192.168.2.0 255.255.255.0FS3 192.168.3.0 255.255.255.0FS4 192.168.4.0 255.255.255.0FS5 192.168.5.0 255.255.255.0FS6 192.168.6.0 255.255.255.0FS7 192.168.7.0 255.255.255.0FS8 192.168.8.0 255.255.255.0FS9 192.168.9.0 255.255.255.0FS10 192.168.10.0 255.255.255.0FS11 192.168.11.0 255.255.255.0FS12 192.168.12.0 255.255.255.0FS13 192.168.13.0 255.255.255.0Table 7-1: DHCP Subnet Configuration Informationg.In the Subnet Mask field, type the subnet mask for your subnet(as specified in the table above).h.In the Default DHCP Server field, select the DHCP server calledDHCP_yourservername.i.Click Create.7-32IG 7-64 This document should only be used by a Novell-certified instructor.Revision 1.0If you think this document was pirated, call 1-800-PIRATES or 1-801-861-7101. Using DNS/DHCP ServicesPresentation NotesHands-On Exercise 7-2:Configuring and StartingDHCP Services (continued)Note: The subnet addresses students use for thisAssist students as needed.exercise should not be valid subnet addresses for yourclassroom network segment.The subnet addresses are provided in the exercise tohelp students learn how to configure DHCP only.Havinga student configure DHCP services using a subnetaddress that is valid for use in your classroom will causeproblems.If the subnet addresses provided in the exercise are validfor your classroom network segment, you will need toprovide your students with subnet addresses that are notvalid for your classroom network segment.Revision 1.0 This document should only be used by a Novell-certified instructor.IG 7-65If you think this document was pirated, call 1-800-PIRATES or 1-801-861-7101.Using DNS/DHCPServices NetWare 5 Advanced Administration Instructor Guide6.Configure your subnet to lease IP addresses on a permanent basis.a.Click your subnet object.b.Click the Subnet Options tab.c.In the Lease Type box, click Permanent.7.Configure a router address to deliver to the workstations on yoursubnet.a.Click the Other DHCP Options tab.b.Click Modify.c.In the Available DHCP Options list, click Router.d.Click Add.e.In the Selected DHCP Options list, click Router.f.In the Router Box, click Add.g.For the router IP address, type your_subnet.254.For example, ifyour subnet is 192.168.20.0, you would type 192.168.20.254.h.Click OK.8.Configure a Domain Name Server address to be delivered to theworkstations on your subnet.a.In the Available DHCP Options list, click Domain Name Server.b.Click Add.c.In the Selected DHCP Options list, click Domain Name Server.d.In the Domain Name Server Box, click Add.e.For the Domain Name Server IP address, type your_subnet.1.For example, if your subnet is 192.168.20.0, you would type192.168.20.1.f.Click OK.g.To close the Modify DHCP Options window, click OK.h.To save the configurations on your subnet object, click the SaveData to NDS button.i.When prompted about saving changes, click Yes.7-33IG 7-66 This document should only be used by a Novell-certified instructor.Revision 1.0If you think this document was pirated, call 1-800-PIRATES or 1-801-861-7101. Using DNS/DHCP ServicesPresentation NotesHands-On Exercise 7-2:Configuring and StartingDHCP Services (continued)Assist students as needed.Revision 1.0 This document should only be used by a Novell-certified instructor.IG 7-67If you think this document was pirated, call 1-800-PIRATES or 1-801-861-7101.Using DNS/DHCPServices NetWare 5 Advanced Administration Instructor Guide9.Create a subnet address range object that will assign the IP addressrange of 50 to 100.a.Click your subnet object.b.Click the Create button.c.Click Subnet Address Range.d.Click OK.e.In the Subnet Address Range Name field, type AvailableAddresses.f.In the fourth octet field of the starting IP address, type 50.g.In the fourth octet field of the ending IP address, type 100.h.Click Create.10.Configure your DHCP Server to exclude the IP address of 10 on yoursubnet.a.Double-click your subnet object.Notice the two default IP address exclusions for addresses 0 and255 for your subnet.b.Click your subnet object.c.Click the Create button.d.Click IP Address.e.Click OK.f.Use the Up-arrow button to set the IP address to 10.g.Make sure the Assignment Type field says Exclusion.h.Click Create.11.Exit the DNS/DHCP Management Console.a.Click the Exit button.b.When asked if you are sure you want to exit, click Yes.Part II: Starting the DHCPServerLoad the DHCP server.At your NetWare server, enterDHCPSRVR7-34IG 7-68 This document should only be used by a Novell-certified instructor.Revision 1.0If you think this document was pirated, call 1-800-PIRATES or 1-801-861-7101. Using DNS/DHCP ServicesPresentation NotesHands-On Exercise 7-2:Configuring and StartingDHCP Services (continued)Assist students as needed.Revision 1.0 This document should only be used by a Novell-certified instructor.IG 7-69If you think this document was pirated, call 1-800-PIRATES or 1-801-861-7101.Using DNS/DHCPServices NetWare 5 Advanced Administration Instructor GuidePart III: Configuring theWorkstation to Use DHCPServicesConfigure a workstation to obtain an IP address from a DHCP server.The focus of this exercise is to configure a workstation so that it will makex a DHCP request.Your DHCP server is not configured for the classroomnetwork segment and will not respond to your workstation s DHCPrequest.Do the following at the workstation:1.Configure the TCP/IP protocol stack for DHCP services.a.On your desktop, right-click Network Neighborhood.b.Click Properties.c.If you are on a Windows NT machine, click the Protocols tab.d.Click the TCP/IP protocol that is installed.e.Click Properties.f.If you are on a Windows NT machine, click Obtain an IP addressfrom a DHCP server.g
[ Pobierz całość w formacie PDF ]